Fumigate Wooden pallets.(20GP can be load 6 pallets) for Fireproof Mgo Magnesium Oxide Board Australian
15~20 days after receipt deposit or L/C (Magnesium Oxide Board)
TITAN® Magnesium Oxide Board (usually called MGO Board) is the building material widely used in the construction area. The stable magnesium colloid is reinforced by middle alkali glass fiber net and stuffed by light material then becomes new frameless decorative material. 100% no Asbestos Contained and no radioactivity.
1. Fireproof, non-combustible Class A1
2. Waterproof, moisture-proof, anti-corrosion, acid and alkali resistance
3. Heat insulation, and sound insulation.
4. Low shrinkage rate, light weight, and high strength, overall low density.
5.Smooth surface, can be painted, pasted tile, pasted wallpaper and other decorative materials.
6.Excellent fire resistance performance.Using 12mm thickness plate can be made partition, it can reach 4 hours of fire resistance.
7. Construction cost of low, and can be cut, saw,nail,and bent.
1220mm × 244mm or 1200mm × 2400mm
3mm ~ 25mm
Square / Tapered / Beveled / Tongue/Groove
0.85 ~ 1.05kg/cm3
Incombustibility A Class(GB8624-A)
>15 Mpa, the strength under the moisture absorbing condition is higher.
Conforming to GB6566-2001 A1 Class
100% Asbestos Free
Rate of length change (wetting %) :
Packaging & Shipping
Loading Quantity Per 20GP
1. Galvanized Metal Frame
a.The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
b.The vertical keel should be aligned well according to the requirement (generally being 612 mm) with
laterally supporting keel installed.
2. Board Material Package Fixed
a.Cutting the board material to the dimensions needed (about 10mm lower than wall height)
b.Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c.The expansion seam of about 4mm between boards should be kept.
d.The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e.Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.
Ceiling Installing Method
1.Carry out ceiling line-measuring to determine the ceiling’s fixed position, the boom’s central range is generally 1200.
2.Connect and fix the boom and main keel with hanging piece to make the main keel keep level position.
3.Vertically fix the sub-keel to the main keel with hanging piece; the sub-keel axis’central range is 612mm.
4.Install the laterally supporting keel properly, its central ranges is 1224mm.
5.Fix the board on sub-keels with tapping screws, and to well the seam-connecting treatment.
The hanging system of TITAN board combined with light steel keel is divided into two kinds of person-standing type
and non person-standing type; for the non person-standing type,only consider the self-weight of ceiling and light.Lamp
without loading other loads;for the person-standing type. Consider about 80~100kg load when someone repaired it.